Online PDF Repair Manual Download link for 2013 Honda Pilot. This manual is how to install Trailer Harness in 2013 Honda Pilot. You can find about how to installation, removal, repair manual other for your car.
Installation Summary :
NOTE:
1. Make sure you have the anti-theft code for the audio unit and the navigation system (if equipped), then write down the radio station presets.
2. Disconnect the negative cable from the battery.
3. Remove the left third row seat:
• Open the rear hatch, and remove the rear cargo tray (ten clips).
• Use a small flat-tip screwdriver, to push on the buckle to release the seat belt lower hook from the left third row seat.
• Remove the two front seat bolt covers from the left third row seat (two retaining tabs for each cover).
• Remove the two front seat bolts from the third seat cushion, then raise the third seat cushion assembly.
• Tilt the left third row seat cushion assembly up, route for two seat belt buckles through the opening in the left third row seat.
• With the left third row seat cushion assembly still tilted up, remove the remaining four seat bolts. Remove the left third row seat. NOTE: When reinstalling the third row seat, apply Honda locktite to seat bolt threads and torque the seat bolts to 41-53 N·m (30-39 lbf·ft)
4. Remove the left rear side step (four clips).
We found this information in search engine is available on the internet. None of those materials are hosted in this server nor uploaded by me in someone’s servers. Read our DISCLAIMER for more detail.
